Cantilever beam: shear force and bending moment diagrams
A 4 m long cantilever fixed at its left end, loaded by a distributed load, a point force at its free end and a point moment in between. The fixed support develops two reaction forces and a fixed-end moment; we calculate these first, then come the internal force functions and the diagrams.
The problem
Determine the support reactions, write the internal force functions and draw the internal force diagrams.
The beam and the loading
Step 1: the support reactions
The fixed support provides a horizontal and a vertical reaction force and a fixed-end moment. The two reaction forces follow from the force equations, and the fixed-end moment from the moment equation about the fixed support.
Resultants of distributed loads
Q1 = 5 · 2 = 10 kN (↓)
Location: x = 22 = 1 m
Support reactions
Assumed positive directions: forces ↑ and →, moments ↺.
ΣFx = 0:
⇒ Ax = 0 kN (no horizontal load)
ΣFy = 0:
Ay − F1 − Q1 = 0
Ay − 10 − 10 = 0
⇒ Ay = F1 + Q1 = 10 + 10
⇒ Ay = 20 kN (↑)
ΣMA = 0:
MA − F1·4 − Q1·1 + M1 = 0
MA − 10·4 − 10·1 + 8 = 0
⇒ MA = F1·4 + Q1·1 − M1 = 10·4 + 10·1 − 8
⇒ MA = 42 kNm (↺)
Step 2: the internal force functions
We divide the beam into segments at the load positions. In each segment we cut the beam at an arbitrary position x and write the normal force, shear force and bending moment from the forces acting on the left part.
Normal force – N(x)
Segment 1: 0 m ≤ x ≤ 2 m
N1(x) = 0
Segment 2: 2 m ≤ x ≤ 3 m
N2(x) = 0
Segment 3: 3 m ≤ x ≤ 4 m
N3(x) = 0
| Segment | N(x) |
|---|---|
| 1. [0; 2] m | 0 |
| 2. [2; 3] m | 0 |
| 3. [3; 4] m | 0 |
Values at the segment boundaries
x = 0 m:
left end of the bar (segment 1): N1(0) = 0 kN
x = 2 m:
left side (segment 1): N1(2−) = 0 kN
right side (segment 2): N2(2+) = 0 kN
x = 3 m:
left side (segment 2): N2(3−) = 0 kN
right side (segment 3): N3(3+) = 0 kN
x = 4 m:
right end of the bar (segment 3): N3(4) = 0 kN
Normal force: functions and values
| Segment | N(x) | x [m] | N [kN] |
|---|---|---|---|
| 1. | 0 | 0 | 0 |
| 2− | 0 | ||
| 2. | 0 | 2+ | 0 |
| 3− | 0 | ||
| 3. | 0 | 3+ | 0 |
| 4 | 0 |
Shear force – V(x)
Segment 1: 0 m ≤ x ≤ 2 m
V1(x) = Ay − q1·x
V1(x) = 20 − 5·x
⇒ V1(x) = −5x + 20
Segment 2: 2 m ≤ x ≤ 3 m
V2(x) = Ay − Q1
V2(x) = 20 − 10
⇒ V2(x) = 10
Segment 3: 3 m ≤ x ≤ 4 m
V3(x) = Ay − Q1
V3(x) = 20 − 10
⇒ V3(x) = 10
| Segment | V(x) |
|---|---|
| 1. [0; 2] m | −5x + 20 |
| 2. [2; 3] m | 10 |
| 3. [3; 4] m | 10 |
Values at the segment boundaries
x = 0 m:
left end of the bar (segment 1): V1(0) = −5·0 + 20 = 20 kN
x = 2 m:
left side (segment 1): V1(2−) = −5·2 + 20 = 10 kN
right side (segment 2): V2(2+) = 10 kN
x = 3 m:
left side (segment 2): V2(3−) = 10 kN
right side (segment 3): V3(3+) = 10 kN
x = 4 m:
right end of the bar (segment 3): V3(4) = 10 kN
Shear force: functions and values
| Segment | V(x) | x [m] | V [kN] |
|---|---|---|---|
| 1. | −5x + 20 | 0 | 20 |
| 2− | 10 | ||
| 2. | 10 | 2+ | 10 |
| 3− | 10 | ||
| 3. | 10 | 3+ | 10 |
| 4 | 10 |
The beam and the shear force diagram
Bending moment – Mh(x)
Segment 1: 0 m ≤ x ≤ 2 m
Mh,1(x) = −Ay·x + MA + q1·x²2
Mh,1(x) = −20·x + 42 + 5·x²2
⇒ Mh,1(x) = 2.5x² − 20x + 42
Segment 2: 2 m ≤ x ≤ 3 m
Mh,2(x) = −Ay·x + MA + Q1·(x − 1)
Mh,2(x) = −20·x + 42 + 10·(x − 1)
⇒ Mh,2(x) = −10x + 32
Segment 3: 3 m ≤ x ≤ 4 m
Mh,3(x) = −Ay·x + MA + Q1·(x − 1) + M1
Mh,3(x) = −20·x + 42 + 10·(x − 1) + 8
⇒ Mh,3(x) = −10x + 40
| Segment | Mh(x) |
|---|---|
| 1. [0; 2] m | 2.5x² − 20x + 42 |
| 2. [2; 3] m | −10x + 32 |
| 3. [3; 4] m | −10x + 40 |
Values at the segment boundaries
x = 0 m:
left end of the bar (segment 1): Mh,1(0) = 2.5·0² − 20·0 + 42 = 42 kNm
x = 2 m:
left side (segment 1): Mh,1(2−) = 2.5·2² − 20·2 + 42 = 12 kNm
right side (segment 2): Mh,2(2+) = −10·2 + 32 = 12 kNm
x = 3 m:
left side (segment 2): Mh,2(3−) = −10·3 + 32 = 2 kNm
right side (segment 3): Mh,3(3+) = −10·3 + 40 = 10 kNm
x = 4 m:
right end of the bar (segment 3): Mh,3(4) = −10·4 + 40 = 0 kNm
Bending moment: functions and values
| Segment | Mh(x) | x [m] | Mh [kNm] |
|---|---|---|---|
| 1. | 2.5x² − 20x + 42 | 0 | 42 |
| 2− | 12 | ||
| 2. | −10x + 32 | 2+ | 12 |
| 3− | 2 | ||
| 3. | −10x + 40 | 3+ | 10 |
| 4 | 0 |
The beam and the bending moment diagram
The largest moment
|Mh|max = 42 kNm at x = 0 m (at a segment boundary).
Step 3: the internal force diagrams
For a cantilever, the absolute value of the bending moment is usually greatest at the fixed support and zero at the free end, unless there is a point moment there. The shear force jumps at the point force.