Gerber beam: shear force and bending moment diagrams
A 10 m long beam on three supports, made statically determinate by an internal hinge. The support reactions are obtained by splitting the beam at the hinge; then we treat the beam as a whole to write the internal force functions.
The problem
Determine the support reactions, write the internal force functions and draw the internal force diagrams.
The beam and the loading
Step 1: the support reactions
We split the beam into two parts at the hinge; the hinge force acts on both parts in opposite directions. We write the three equilibrium equations for both parts and solve the six equations for the four support reactions and the two components of the hinge force.
Resultants of distributed loads
Q1 = 10 · 4 = 40 kN (↓)
Location: x = 42 = 2 m
Support reactions
Assumed positive directions: forces ↑ and →, moments ↺.
The beam is split into 2 parts at the hinges (C). At a hinge the two parts act on each other with a force each: on the part to the left of the hinge Cx acts to the right (→) and Cy upwards (↑); on the part to the right a force of the same size but in the opposite direction acts (action and reaction). The hinge does not transfer moment.
For each part the same three equilibrium equations are written: ΣFx = 0, ΣFy = 0 and the moment equation about the first support of the part (ΣMi = 0). The moment equation could also be written about the hinge or about the other support of the part (if there is one), and the result would be the same; for consistency we always choose the first support.
Part 1
0 ≤ x ≤ 6 m, from the left end of the beam to hinge C. Unknowns on this part: Ax, Ay, By, Cx, Cy. The moment equation is written about the first support (A).
ΣFx = 0:
Ax + Cx = 0 (1)
ΣFy = 0:
Ay + By + Cy − Q1 = 0
Ay + By + Cy − 40 = 0 (2)
ΣMA = 0:
By·4 + Cy·6 − Q1·2 = 0
By·4 + Cy·6 − 40·2 = 0 (3)
Part 2
6 ≤ x ≤ 10 m, from hinge C to the right end of the beam. Unknowns on this part: Dy, Cx, Cy. The moment equation is written about the first support (D).
ΣFx = 0:
−Cx = 0 (4)
ΣFy = 0:
Dy − Cy − F1 = 0
Dy − Cy − 20 = 0 (5)
ΣMD = 0:
Cy·4 + F1·2 = 0
Cy·4 + 20·2 = 0 (6)
The system of equations
For the 2 parts we wrote 6 equilibrium equations in total. The unknowns (6): Ax, Ay, By, Dy, Cx, Cy. They cannot be expressed one by one, so the 6 equations are solved as a system (e.g. by substitution or Gaussian elimination).
Ax + Cx = 0 (1)
Ay + By + Cy = 40 (2)
By·4 + Cy·6 = 80 (3)
−Cx = 0 (4)
Dy − Cy = 20 (5)
Cy·4 = −40 (6)
Solving the system of equations
Ax = 0 kN (→)
Ay = 15 kN (↑)
By = 35 kN (↑)
Dy = 10 kN (↑)
Cx = 0 kN (→)
Cy = −10 kN (↓)
The hinge forces act on the part to the left of the hinge in the assumed direction (Cx →, Cy ↑); a force of the same size in the opposite direction acts on the part to the right.
Check
With the calculated support reactions, the equilibrium equations written for the whole beam must also be satisfied. On the whole beam the hinge forces cancel out (they act on the two neighbouring parts in opposite directions), and the distributed loads are taken into account here in one piece, with their total resultant.
ΣFx = 0:
0 = 0
⇒ 0 = 0 ✓
ΣFy = 0:
Ay + By + Dy − F1 − Q1 = 0
15 + 35 + 10 − 20 − 40 = 0
⇒ 0 = 0 ✓
ΣMA = 0:
By·4 + Dy·10 − F1·8 − Q1·2 = 0
35·4 + 10·10 − 20·8 − 40·2 = 0
⇒ 0 = 0 ✓
Step 2: the internal force functions
We divide the beam into segments at the load positions. In each segment we cut the beam at an arbitrary position x and write the normal force, shear force and bending moment from the forces acting on the left part.
The bending moment is zero at the hinge; the derivation also shows this as a check.
Normal force – N(x)
Segment 1: 0 m ≤ x ≤ 4 m
N1(x) = 0
Segment 2: 4 m ≤ x ≤ 6 m
N2(x) = 0
Segment 3: 6 m ≤ x ≤ 8 m
N3(x) = 0
Segment 4: 8 m ≤ x ≤ 10 m
N4(x) = 0
| Segment | N(x) |
|---|---|
| 1. [0; 4] m | 0 |
| 2. [4; 6] m | 0 |
| 3. [6; 8] m | 0 |
| 4. [8; 10] m | 0 |
Values at the segment boundaries
x = 0 m:
left end of the bar (segment 1): N1(0) = 0 kN
x = 4 m:
left side (segment 1): N1(4−) = 0 kN
right side (segment 2): N2(4+) = 0 kN
x = 6 m:
left side (segment 2): N2(6−) = 0 kN
right side (segment 3): N3(6+) = 0 kN
x = 8 m:
left side (segment 3): N3(8−) = 0 kN
right side (segment 4): N4(8+) = 0 kN
x = 10 m:
right end of the bar (segment 4): N4(10) = 0 kN
Normal force: functions and values
| Segment | N(x) | x [m] | N [kN] |
|---|---|---|---|
| 1. | 0 | 0 | 0 |
| 4− | 0 | ||
| 2. | 0 | 4+ | 0 |
| 6− | 0 | ||
| 3. | 0 | 6+ | 0 |
| 8− | 0 | ||
| 4. | 0 | 8+ | 0 |
| 10 | 0 |
Shear force – V(x)
Segment 1: 0 m ≤ x ≤ 4 m
V1(x) = Ay − q1·x
V1(x) = 15 − 10·x
⇒ V1(x) = −10x + 15
Segment 2: 4 m ≤ x ≤ 6 m
V2(x) = Ay − Q1 + By
V2(x) = 15 − 40 + 35
⇒ V2(x) = 10
Segment 3: 6 m ≤ x ≤ 8 m
V3(x) = Ay − Q1 + By
V3(x) = 15 − 40 + 35
⇒ V3(x) = 10
Segment 4: 8 m ≤ x ≤ 10 m
V4(x) = Ay − Q1 + By − F1
V4(x) = 15 − 40 + 35 − 20
⇒ V4(x) = −10
| Segment | V(x) |
|---|---|
| 1. [0; 4] m | −10x + 15 |
| 2. [4; 6] m | 10 |
| 3. [6; 8] m | 10 |
| 4. [8; 10] m | −10 |
Values at the segment boundaries
x = 0 m:
left end of the bar (segment 1): V1(0) = −10·0 + 15 = 15 kN
x = 4 m:
left side (segment 1): V1(4−) = −10·4 + 15 = −25 kN
right side (segment 2): V2(4+) = 10 kN
x = 6 m:
left side (segment 2): V2(6−) = 10 kN
right side (segment 3): V3(6+) = 10 kN
x = 8 m:
left side (segment 3): V3(8−) = 10 kN
right side (segment 4): V4(8+) = −10 kN
x = 10 m:
right end of the bar (segment 4): V4(10) = −10 kN
Shear force: functions and values
| Segment | V(x) | x [m] | V [kN] |
|---|---|---|---|
| 1. | −10x + 15 | 0 | 15 |
| 4− | −25 | ||
| 2. | 10 | 4+ | 10 |
| 6− | 10 | ||
| 3. | 10 | 6+ | 10 |
| 8− | 10 | ||
| 4. | −10 | 8+ | −10 |
| 10 | −10 |
The beam and the shear force diagram
Bending moment – Mh(x)
Segment 1: 0 m ≤ x ≤ 4 m
Mh,1(x) = −Ay·x + q1·x²2
Mh,1(x) = −15·x + 10·x²2
⇒ Mh,1(x) = 5x² − 15x
Segment 2: 4 m ≤ x ≤ 6 m
Mh,2(x) = −Ay·x + Q1·(x − 2) − By·(x − 4)
Mh,2(x) = −15·x + 40·(x − 2) − 35·(x − 4)
⇒ Mh,2(x) = −10x + 60
Segment 3: 6 m ≤ x ≤ 8 m
Mh,3(x) = −Ay·x + Q1·(x − 2) − By·(x − 4)
Mh,3(x) = −15·x + 40·(x − 2) − 35·(x − 4)
⇒ Mh,3(x) = −10x + 60
Segment 4: 8 m ≤ x ≤ 10 m
Mh,4(x) = −Ay·x + Q1·(x − 2) − By·(x − 4) + F1·(x − 8)
Mh,4(x) = −15·x + 40·(x − 2) − 35·(x − 4) + 20·(x − 8)
⇒ Mh,4(x) = 10x − 100
| Segment | Mh(x) |
|---|---|
| 1. [0; 4] m | 5x² − 15x |
| 2. [4; 6] m | −10x + 60 |
| 3. [6; 8] m | −10x + 60 |
| 4. [8; 10] m | 10x − 100 |
Values at the segment boundaries
x = 0 m:
left end of the bar (segment 1): Mh,1(0) = 5·0² − 15·0 = 0 kNm
x = 4 m:
left side (segment 1): Mh,1(4−) = 5·4² − 15·4 = 20 kNm
right side (segment 2): Mh,2(4+) = −10·4 + 60 = 20 kNm
x = 6 m:
left side (segment 2): Mh,2(6−) = −10·6 + 60 = 0 kNm
right side (segment 3): Mh,3(6+) = −10·6 + 60 = 0 kNm
x = 8 m:
left side (segment 3): Mh,3(8−) = −10·8 + 60 = −20 kNm
right side (segment 4): Mh,4(8+) = 10·8 − 100 = −20 kNm
x = 10 m:
right end of the bar (segment 4): Mh,4(10) = 10·10 − 100 = 0 kNm
Bending moment: functions and values
| Segment | Mh(x) | x [m] | Mh [kNm] |
|---|---|---|---|
| 1. | 5x² − 15x | 0 | 0 |
| 4− | 20 | ||
| 2. | −10x + 60 | 4+ | 20 |
| 6− | 0 | ||
| 3. | −10x + 60 | 6+ | 0 |
| 8− | −20 | ||
| 4. | 10x − 100 | 8+ | −20 |
| 10 | 0 |
Moment at the zero of the shear force
Segment 1
V1(x) = 0
−10x + 15 = 0
⇒ x = 1510
⇒ x = 1.5 m
Mh,1(1.5) = 5·1.5² − 15·1.5 = −11.25 kNm
Check: moment at the hinge
The hinge does not transfer moment, so the bending moment at the hinge must be zero (on both sides of the hinge; if a point moment acts at the hinge, then on the side it acts on, the bending moment equals exactly that moment).
Hinge C (x = 6 m):
left side (segment 2): Mh,2(6) = −10·6 + 60 = 0 kNm ✓
right side (segment 3): Mh,3(6) = −10·6 + 60 = 0 kNm ✓
The beam and the bending moment diagram
The largest moment
|Mh|max = 20 kNm at x = 4 m (at a segment boundary).
Step 3: the internal force diagrams
The bending moment diagram passes through zero at the hinge. The shear force jumps at the intermediate support and at the point force.